0
I
II
I
II
III
IV
0
P
0
START
START
START
3236
3236
3397
0
I
2
374023
1
2.7. Machine Control and Usage
2.7.4. How to stop the Machine and the engine
Before braking to a stop, shift the controller (2) to neutral, •
and when stopped, switch ON the parking brake, shut OFF
the engine and pull out the key (1).
Note:
With the key pulled out from ignition box the Roller will auto-
matically be braked.
With the engine running the parking
brake switch must be ON with the Roller
at standstill!
Do NOT shut o the engine immediately,
instead let it run for 3 ÷ 5 minutes at idle
thrust at 850 rpm for turbocharger to
cool down.
When work is completed, always discon-
nect the battery via battery disconnec-
tor! Observe time limit of 30 sec. before
disconnecting the battery following ig-
nition box switched OFF so to maintain
Machine operation data in ECM of the
engine.
NEVER park your Roller on a slope with
gradient of over 15 %!
To Next Page
Loading...
