SPECIFICATION MANUAL1.3. Technical data
Weight
Operating weight of CECE with cab, ROPS kg (lb) 9590 (21140)
Operating weight of CECE with cab kg (lb) 9290 (20480)
Operating weight of CECE with platform, rail kg (lb) 9060 (19970)
Weight of half uid capacities kg (lb) 340 (750)
Operating weight of ISO 6016 with cab, ROPS kg (lb) 9930 (21890)
Max. weight – cab + ROPS (6016) + accessories + weighing kg (lb) 24000 (52910)
Maximum permitted weight according to ROPS kg (lb) 24000 (52910)
Weight of empty ballast tanks kg (lb) 1100 (2430)
Balance weight 6 t kg (lb) 6000 (13230)
Weight of ballast tanks lled with concrete kg (lb) 2800 (6170)
Weight of ballast in frame – water kg (lb) 3000 (6610)
Weight of ballast in frame – sand kg (lb) 4500 (9920)
Weight of ballast in the frame – scrap up to the total machine
weight
kg (lb) 24000 (52910)
Cab weight kg (lb) 280 (620)
Weight of ROPS kg (lb) 300 (660)
Weight of ROPS/FOPS (CNH design) kg (lb) 530 (1170)
Weight of sheet roof on ROPS kg (lb) 50 (110)
Weight of canopy kg (lb) 50 (110)
Weight of canopy posts (version without ROPS) kg (lb) 60 (130)
Weight of wheel insulation kg (lb) 120 (260)
Weight of Ammann cutter kg (lb) 150 (330)
Driving characteristics
Number of speeds - 3
Maximum transport speed km/h (MPH) 0-19 (0-11,8)
Working speed 1 km/h (MPH) 0-5 (0-3,1)
Working speed 2 km/h (MPH) 0-11 (0-6,8)
Working speed 3 km/h (MPH) 0-19 (0-11,8)
Climbing ability % 25
Lateral static stability % 32
Turning radius inner (edge) left mm (in) 6180 (243,3)
Turning radius inner (edge) right mm (in) 6065 (238,8)
Turning radius outer (contour) left mm (in) 9960 (392,1)
Turning radius outer (contour) right mm (in) 8735 (343,9)
Type of drive - Hydrodynamic
Type of gearbox - Three-stage reversing
Number of driving axles - 1
Number of driven wheels - 4
Oscillation angle ° 3
Angle of steering ° 32
Steering
Type of steering - Two-point suspension
Steering control - Hydraulic power steering
Linear hydraulic motors - 1
To Next Page
Loading...
