3.6. Lubrication and Maintenance Operations
3.6.26. How to replace nal drive oil
Drain sprinkling tank, refer to Section called “How to clean •
sprinkling lter”. Remove the tank.
Remove ller plug (1) and inspection plug (2).•
Drain oil when operation has ended, af-
ter oil has cooled down to 50 °C, or while
driving, wait until oil warms up.
Carry out rst replacement after 250
hours of operation of new Machine or af-
ter Major Overhaul.
Beware of burn hazard when draining
hot oil.
To Next Page
Loading...
