Ammann AP 240 - Requirements for Qualification of Driver

25AP 240
OPERATION MANUAL
2.1.2. Requirements for qualication of driver
Only a driver trained to ISO 7130 and other local and inter- •
national regulations and standards designed for drivers of
this class, may operate the Roller.
Only a person learning to drive under a direct and constant
•
supervision by a professional lector or trainer in order to
get a preliminary practice, may drive the Machine with no
certicate of competency, with the approval by Machine
Operator.
Holder of the competency (licence) will be liable to duly
•
keep the licence, and submit it, as requested, to the control
authorities.
Holder of the competency shall not make any entries, chan-
•
ges or corrections in the licence.
Holder shall report immediately his/her licence loss to the
•
one who issued such licence.
Person mentally competent and physically t person, over
•
18 years old may drive the Roller individually if:
a) Authorized by Machine manufacturer, for the assembly
work, testing and demonstrate the Machine, or eventu-
ally for training the drivers whereas he/she must have
been made familiar with the work safety regulations ef-
fective in the workplace;
or
b) Assigned by construction work supplier to operate (car-
ry out maintenance), trained and drilled with conclusive
evidence, or eventually owning professional competen-
cy to operate and drive under special regulations (ma-
chinist certicate, or others).
Machine driver shall be trained min. 1x every 2 years and
•
examined in regulations to provide for occupational safety.