Unscrew oil lter, collect oil owing out. Apply oil over new •
lter’s packing ring. Screw on the new lter and tighten with
27 – 34 Nm (20 – 25 lb ft) torque.
Let gearbox cool down below 50 °C be-
fore replacing.
3.6.19. How to replace CLARK gearbox oil lter
Open the cover in the oor.•
Replace rst after 100 hours of operation
of new Machine of after Major Overhaul!
Use only CLARK lters recommended.
Do NOT tighten with force, danger of
threads and gasket damaged.
Spent lter is ecologically hazardous
waste, hand over for disposal.
To Next Page
Loading...
