Ammann AP 240 - 3.4. Lubrication and Maintenance Chart

94 AP 240
3.4. Lubrication and Maintenance Chart
After 20 hours of operation (daily)
3.6.1. Engine oil level check
3.6.2. Engine cooling liquid level check
3.6.3. Crankcase breather tube
3.6.4. Check of the fan and engine belt condition
3.6.5. Check air lter vacuum valve
3.6.6. Hydraulic tank oil level check
3.6.7. Check brake fuel
3.6.8. Fill up sprinkling tank
3.6.9. Cleaning of the water separator
3.6.10. Check oil level in gearbox
3.6.11. Check alarm and control instruments
After 100 hours of operation (weekly)
3.6.12. Checking the tyre pressure
After 250 hours of operation (3 months)
3.6.13. How to exchange oil in engine
3.6.14. Check the engine induction manifold and air lter sensor
3.6.15. Battery check
3.6.16. Machine lubrication
After 500 hours of operation (6 months)
3.6.17. Fuel lter replacement
3.6.18. Engine cooling liquid level check
3.6.19. How to replace CLARK gearbox oil lter **
3.6.20. Check oil for nal drive and rear axle
3.6.21. Check of wiring