3.6.33. Exchanging the engine cooling liquid
! CAUTION !
Drain liquid when operation is nished, and when
driving the Machine, wait until liquid warms up to
80 °C (176 °F) temperature.
Do NOT remove the lid before cooling
liquid drops below 50 °C (122 °F). Hot
water scald hazard.
Remove plug. Let liquid ow out into the vessel of 11,5 l •
(3 gal US) capacity.
Check no hose pipes are damaged within engine’s cooling •
system and no hose clips are missing. Inspect condition of
radiator whether it is not damaged, leaking, or whether ra-
diator’s plates are not clogged with dirt. Clean and repair it
if required.
Take o the lid from equalizer tank.•
To Next Page
Loading...
