Ammann AP 240 - Ecological and Hygienic Standards

88 AP 240
3.1. Safety standards and other maintenance regulations
3.1.3. Ecological and hygienic standards
When operating and maintening the machine the owner is
obliged to keep the common regulations of health and environ-
ment protection and the laws, regulations and promuglations,
correlative to this problems and valid in the region of the ma-
chine use.
Hygienic standards
The petroleum products, cooling systems lls, accumula-•
tors, brake liquids and lls and paints including the thinners
are harmful materials. Workers that come into contact with
these materials during the service and maintenance of the
machine, are obliged to keep the common standards of
health protection and they must keep the safety and hygi-
enic manuals of the manufacturers of these materials.
We want you to focus your attention mainly on these areas:•
eyes and skin protection when manipulating with the
-
accumulators
skin protection when manipulating with the petroleum
-
products, paints, cooling liquids and brake liquids
proper washing the hands after nishing the work and
-
before the meal, treat the hands using the appropriate
regenerating cream
when manipulating with cooling systems, keep the ma-
-
chine manipulating manual instructions.
The petroleum products, cooling systems lls, accumulators •
lls, brake liquids and paints including the organic thinners
and also cleaning and preservative means always store on
a original, properly signed covers. Don’t allow storing of
these materials in the non-marked vessels and other cans
due to danger of exchange. Extremely danger may be the
exchange with meal or drinks.
In the case of accidental stain of the skin, mucous mem-•
branes, eyes or of inhalation of the vapour, apply immedi-
ately the rst aid. In such case nd the emergency rst aid.
When working with the machine unequipped with the cab, •
or with opened windows and cab door, always use the ears
protections of convenient kind and design.
Ecological standards
The lls of individual machine systems
and also some parts are after black-
out (dismounting, changing the lls)
the garbage with risk attributes for the
environment.
To this category of waste products includes:•
organic and synthetic lubricants, oils and fuels
-
brake uids
-
cooling liquids
-
accumulator lling and accumulators themselves
-
the conditioner systems llings
-
cleaning and preservative materials
-
all dismounted lters and lter inserts
-
all used and blackouted hydraulic and fuel pipes, rubber
-
steels and other machine parts, contaminated by mate-
rials above
With materials and parts listed we must
work after blackout according to the
appropriate national regulations for in-
dividual environment parts protection
and according to the health protection
regulations.