76 AP 240
2.8. How to transport the Machine
The machine can move on its own between working sites. •
When transporting the machine on a ve-
hicle, observe the regulations in force in
the given territory.
When moving, observe the safety mea-
sures applicable to the working site.
When on the road, the machine should be transported on •
a vehicle.
When loading and unloading, the ve-
hicle transporting the machine must
be braked and mechanically protected
against accidental movement using
scotch blocks (3).
If the Machine has been equipped with
dierential interlock - then lock in the in-
terlock before running onto the carrier’s
platform!
The machine on the vehicle must be
properly tied and mechanically secured
against longitudinal and lateral dis-
placement as well as against tipping (1).
The drums must be secured using scotch
blocks (2).
To Next Page
Loading...
