3.6. Lubrication and Maintenance Operations
3.6.37. How to replace air lter elements
Note:
Air lter contains the main element and safety element.
Slacken the clips and take o the lid.•
Pull out the main element.•
Remove safety element and check for any damage – do NOT •
clean it. Clean inner space of the lter and the contact faces
so to avoid any dust penetrating into the supply piping that
leads to the engine. Put back safety element and new main
element.
When pilot lamp lights up, please replace
the main element. Replace safety ele-
ment after three replacements of main
element. Manufacturer does not recom-
mend any cleaning of the element due to
lowered ltration capacity by up to 40 %
and due to potential of damaging the el-
ement when being cleaned.
To Next Page
Loading...
