3.6. Lubrication and Maintenance Operations
3.6.30. How to exchange hydraulic oil and lter
Beware of burn hazard when draining
hot oil.
Open the cover and drain 22 l (5,81 US gal) of oil via the •
valve. When drained, close the valve.
Disconnect sensor for lter (1) clogged, remove lter cover •
(2).
Exchange oil before season or following
a long term shutdown of the Machine.
Drain oil when operation has ended after
cooling down to 50 °C, or while driving
the Machine, wait until oil warms up.
Observe re precautions!
Remove the cover.•
To Next Page
Loading...
