Ammann AP 240 - 2.7.7. Edge Cutter

75AP 240
374109A
374111
MADE IN CZECH REPUBLIC
YEAR OF CONSTRUCTION
3459
AMMANN CZECH REPUBLIC a.s.
549 01 NOVÉ MÌSTO NAD METUJÍ
CZECH REPUBLIC
Náchodská 145
TYPE
DESIGNATION
MAXIMUM MASS
SERIAL NUMBER
3459
1
2
3
4
5
374109B
OPERATION MANUAL
2.7.7. Edge Cutter
Press the switch to lower the edge cutter to its end position •
and vice versa.
Conrm nobody is in hazard before low-
ering, lifting.
When operating the edge cutter, switch ON the sprinkler •
and open the valve near edge cutter disc.
Scraper plate location.
Scraper plate
1 - Name – always mentioned only in the English version
2 - Type
3 - Serial number
4 - Maximum weight
5 - Year of manufacture