3.6.8. Fill up sprinkling tank
Open the cap and ll up with clean water.•
3.6.9. Cleaning of the water separator
This should be performed with the full air pressure in the •
air reservoir (according to the brake circuit pressure gauge).
Shut OFF engine, switch ON parking brake. Pull drain valve’s
chain to conrm valve operation is OK.
3.6.10. Check oil level in gearbox
Unscrew and pull out dipstick, wipe o and push in again. •
Pull it out once more and check oil level – it must reach the
upper gauge line.
Fill up oil using this neck and screw the oil level gauge •
back.
! CAUTION !
Check with the engine idling at oil temperature of
82÷93 °C – best after Machine operation is ended.
Open and lift o the cover between pedals on Machine’s •
oor.