Ammann AP 240 - Engine Cooling Liquid Level Check; Crankcase Breather Tube

99AP 240
374072
374081
MAINTENANCE MANUAL
3.6.2. Engine cooling liquid level check
Check cooling liquid level with the engine at rest, cooled •
down below 50 °C (120 °F), maintain this level between
”MIN” and ”MAX” marks.
Wait to remove the ller plug only after
engine coolant temperature drops below
50 °C. If ller plug is removed at higher
temperature then there is hazard of va-
pour scald or cooling liquid scald due to
inner overpressure eect.
! CAUTION !
Top up cooling liquid the composition of which is
given in Section 3.2.3.
Do NOT use any additives in the engine cooling liq-
uid to eliminate cooling system leakage!
Do NOT rell cold coolant into hot engine! Danger
of engine castings damaged.
3.6.3. Crankcase breather tube
Check the outlet is not clogged with deposits.•