147AP 240
MAINTENANCE MANUAL
3.6.42. Clean the Machine
When the work is completed clean the Machine to get rid •
of major dirt! Carry out overall cleaning on regular basis, at
least once per week. When working on cohesive soils, soil
cements and lime soil, carry out overall cleaning on daily ba-
sis. Pay attention to the function of scrapers!
Before pressure cleaning the Machine
with water or steam, please blind all the
ports into which a cleaner might pen-
etrate (e.g. engine inlet port, cabin’s
ventilation port, etc.). With the Machine
cleaned remove these blinds.
Disconnect master switch!
NEVER expose electric parts or insula-
tion material (alternator, electric con-
nections, etc.) to direct stream of pres-
sure water or steam, always cover these
locations.
Carry out the work with the engine
stopped.
Follow producer’s instructions when us-
ing cleaning agents.
NEVER use aggressive or easily ignitable
cleaning agents (e.g. petrol and/or in-
cendiary materials easy to ignite).
When cleaning, please proceed according
to ecological standards and regulations.
Perform cleaning at workplaces
equipped with cleaning agent collection
system to avoid any contamination of
soil and water resources.
Do NOT use forbidden cleaning agents.
To Next Page
Loading...
