Ammann AP 240 - Page 22

16 AP 240
1.3. Technical Data
Engine
Manufacturer - Cummins
Type - QSB3.3-C99
Power according to DIN 6271 kW (HP) 74 (99)
Power according to ISO 3046/1 kW (HP) 74 (99)
Number of cylinders - 4
Cylinder capacity cm
3
(cu in) 3300 (199)
Nominal speed min
-1
(RPM) 2200
Maximum torque Nm (ft lb)/rpm 412(304)/1400
Routine operation fuel consumption l/h (gal US/h) 7,8 (2,0)
Engines complies with emission regulations -
97/68/EU Level 3,
EPA/CARB 40 CFR Part 89 Tier 3
Cooling system of engine - Liquid
Maximum permitted speed during engine braking min
-1
(RPM) 3250
Axle
Maximum tyre pressure MPa (PSI) 0,75 (109)
Minimum tyre pressure MPa (PSI) 0,2 (29)
Pattern of tyres - COM HL.
Number of tyres - 8
Number of front wheels - 4
Number of rear wheels - 4
Size of tyres - 11,00x20´´
Type of tyres - Tube Type
Brakes
Operating - Hydrostatic
Parking - Mechanical multiple-disc
Emergency - Mechanical multiple-disc
Watering
Type of watering - Pressure
Number of pumps - 1
Fluid capacities
Fuel l (gal US) 250 (66)
Water for tyre watering l (gal US) 460 (122)
Engine (oil lling) l (gal US) 7,0 (1,85)
Cooling system l (gal US) 20,5 (5,4)
Gearbox oil l (gal US) 21,5 (5,68)
Dierential oil l (gal US) 6 (1,58)
Oil in front axle disengaging l (gal US) 6 (1,6)
End gear oil l (gal US) 2x5,2 (2x1,4)
Hydraulic system oil l (gal US) 22 (5,81)
Front wheel hydraulic system oil l (gal US) 6 (1,6)
Brake uid l (gal US) 1,75 (0,46)
Wiring
Voltage V 12
Battery capacity Ah 135