15
SAFETY PRECAUTIONS
USE HANDHOLDS AND STEPS
Falling is one of the major causes of personal injury.
When you get on and off the machine, always maintain
a three-point contact with the steps and handrails and
face the machine. Do not use any controls as handholds.
Never jump on or off the machine. Never mount or
dismount a moving machine.
Be careful of slippery conditions on platforms, steps,
and handrails when leaving the machine.
ADJUST THE SEAT
Adjust the seat whenever changing operators. Be sure
that the operator can fully depress the pedals with his
back against the seat back.
If not, move the seat forward and check again.
INSPECT THE MACHINE
Inspect the machine carefully every day or work-shift
by an attentive visual inspection of machine outside prior
to starting it to prevent damages and personal injuries.
In the walk-around inspection, be sure to cover all points
detailed in the Chapter “MAINTENANCE”, paragraph
“EXTERNAL VISUAL INSPECTION”.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
