18
SAFETY PRECAUTIONS
MOVE AND OPERATE MACHINE SAFELY
Bystanders are in danger of being run over.
Confirm the location of bystanders before moving,
swinging, or operating the machine.
Always keep the travel alarm in good working condition.
(if equipped). It warns people when the machine starts
to move.
Use a signal person when moving, swinging, or
operating the machine in congested areas. Coordinate
hand signals before starting the machine.
WORK WITH CAUTION
Accidental severing of underground cables or gas lines
may cause an explosion and/or fire, possibly resulting
in serious injury or death.
Before digging, check the location of cables, gas lines,
and water lines.
Keep the minimum distance required by law from
cables, gas lines, and water lines. If a fiber optic cable
should be accidentally severed, do not look into the
end. Doing so may result in serious eye injury.
Contact local authorities and/or the utility companies
directly (electric power, gas, telephone, water, sewers,
telecommunications, etc.) to obtain information about
underground utility lines.
RULES FOR ROAD TRANSFER
The machine is equipped with safety locks to be used
for road transfer.
When transferring the machine:
- Locate cylinders as shown in homologation confi-
guration.
- Lock cylinders (cocks, reference marks).
- Lift dozing blade (if equipped).
- Unlock equipment control levers shifting safety
device lever to lock position.
On the road follow the rules regulating traffic.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
