22
SAFETY PRECAUTIONS
PROVIDE SIGNALS FOR JOBS INVOLVING
A NUMBER OF MACHINES
For jobs involving several machines, provide signals
commonly known by all personnel involved.
Also, appoint a signal person to co-ordinate the job
site.
Make sure that all personnel obey the signal person’s
directions.
PARK MACHINE SAFELY
Before working on the machine:
- Park machine on a level surface.
- Lower bucket to the ground.
- Move turret swing lever to lock position.
- Run engine at slow idle speed without load for
3 minutes.
- Turn key switch to OFF to stop engine. Remove
key from switch.
- Pull pilot control shut-off lever to LOCK position.
- Allow engine to cool.
- Close windows, roof window, and cab door.
- Lock all access doors and compartments.
NEVER WORK UNDER PROJECTING
BANKS
The edges could collapse o a land slide could occur
causing serious injury or death.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
