4
INTRODUCTION
Data and figures from this manual must not be copied or distributed in any way, since they are protected by copyright.
INTRODUCTION
Vibration roller ASC 70/250 series is suitable for compaction of all kinds of ground and for large- and mid-scale groundwork
in highway construction (construction of motorways, railways, airports), in hydro-engineering (construction of dams), in building
construction (industrial areas, ports), and the like.
The roller should be used under conditions defined in the Czech Standard (CSN) IEC 721-2-1 (038900): WT, WDr, MWDr, i. e.
in mild, dry warm and dry hot weather in the range of temperatures from -15 °C (5 °F) to 45 °C (113 °F).
This STA machine is manufactured to the latest developments and standards, which secure its safe function.
If the machine is used incorrectly, by untrained operators or for other purpose than stipulated above, there is a danger of an
accident or damage to the equipment.
The main purpose of this manual is to give information necessary for carrying out assembly and disassembly of the machine as
well as service repairs of main assemblies of the equipment. It contains technical and installation data, instructions how to adjust
the machine and how to use special tools, fixtures and aids.
The manufacturer continuously improves the products on the basis of experience and latest developments in the field.
For this reason, the manufacturer may make some changes in drawings, descriptions and designs in this manual.
Some expressions are used in the manual for better orientation, i. e. right, left, forward, backward – in the sense of the machine
moving forward.
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
