iDesign Advanced WaveScan Studio System
Operator’s Manual
0110-0624 Rev. D 0217
This manual contains information for the iDesign Advanced WaveScan Studio System,
hereafter called the iDesign System. The information contained in this document is the
confidential and proprietary property of AMO Manufacturing USA, LLC (AMO). No part of
this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording, or any information storage and retrieval
system, without permission in writing from AMO Manufacturing USA, LLC.
Advanced CustomVue, PreVue, STAR S4 IR, iDesign Advanced WaveScan Studio, and
iDesign are trademarks owned by or licensed to Abbott Laboratories, its subsidiaries or
affiliates.
Pentium is a registered trademark of Intel Corporation. Please note that while every effort has
been made to ensure that the data provided in this document are accurate, the information,
figures, illustrations, tables, specifications, and schematics contained herein are subject to
change without notice.
Manufacturer:
AMO Manufacturing USA, LLC
510 Cottonwood Drive
Milpitas, CA 95035 USA
1-800-511-0911 (USA only)
www.amo-inc.com
Product of USA
Order Placement of Accessories and Replacement Parts
Call 1-800-511-0911 (USA only)
Call +800-511-09111 outside USA or contact your local representative.
Returns or Technical Service
Call 1-800-511-0911 (USA only)
All returns must be accompanied by an RGA# (Returned Goods Authorization).
Call +800-511-09111 outside USA or contact your local representative.
Rx Only
© Copyright 2017 Abbott Medical Optics Inc.
To Next Page
Loading...