AMP AMP25B-1.1/28 - User Manual

Need help?

Do you have a question about the AMP AMP25B-1.1/28 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

The AMP25B-1.1/28 is a wire-free, rechargeable motor designed for advanced motorization programs, specifically for window coverings. It features 2-way technology, offering superior value and innovation, and is paired with a smart, seamless user interface. This motor is suitable for various applications including Roller, Sheer, Banded, and Roman shades.

Function Description:

The AMP Motorization system allows for the remote control and automation of window coverings. Key functions include:

Motor Control: Users can move shades up, down, and stop them at desired positions.
Limit Setting: The motor allows for the setting and adjustment of upper and lower limits, defining the maximum and minimum travel points for the shade.
Favorite Position: A specific "favorite" position can be programmed and recalled with a single command.
Remote Pairing: The system supports pairing and unpairing of remote controls, allowing for multiple remotes to control a single motor or vice versa.
Direction Reversal: The motor's direction of movement can be reversed if it operates in the opposite direction to the remote's commands.
Motor Speed Adjustment: Users can adjust the acceleration and deceleration speeds of the motor, offering three distinct speed settings.
Shade Mode Selection: The motor supports two modes: "Roller Shade Mode" for continuous movement after a short press, and "Sheer Shade Mode" for jog movement after a short press (with continuous movement after a long press).
Advanced Setting Lock: The remote control features a lock switch to disable limit setting commands, preventing accidental or unintended changes to programmed limits after initial setup.

Important Technical Specifications:

Motor Type: Wire-free 1.1Nm rechargeable motor with built-in Li-ion battery.
Battery Life: Approximately 500 up/down cycles per full charge.
Charging Port: Micro USB Charger Port.
Charging Input: Max power input for recharging: 5V 2A.
Motor Speed Settings: 3 settings: 20, 24, or 28rpm.
Sound Level: Approximately 46dB.
Warranty: 5 years.
Remote Control Battery: CR2450 (positive (+) side facing up).
FCC Compliance: Complies with Part 15 of the FCC Rules, ensuring it does not cause harmful interference and accepts any received interference.
ISED RSS Warning: Complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s).

Usage Features:

P1 Button Instructions: The motor head features a P1 button for various functions:
- Test Motor: Press for less than 1 second to wake and run the motor.
- Activate Pairing Mode: Press for approximately 2 seconds until the shade jogs once and beeps once.
- Sleep Mode: Press for approximately 6 seconds until the shade jogs twice and beeps twice.
- Reverse Direction: Press for approximately 10 seconds until the shade jogs three times and beeps three times.
- Reset To Factory Settings: Press for approximately 14 seconds until the shade jogs four times and beeps four times.
Remote Control Interface: The remote features an LCD display, Up, Stop, Down buttons, and channel selection buttons (< and >). A P2 button is located on the back for advanced programming.
Channel Options: The remote allows selection of channels (1 to 15) and the ability to hide unused channels for a streamlined user experience.
Initial Setup: Includes procedures for pairing the remote, changing motor direction (if needed), and setting upper and lower limits.
Adjust Limits: Detailed steps for fine-tuning upper and lower limits using combinations of Up, Down, and Stop buttons on the remote.
Favorite Position Management: Easy programming, recall, and deletion of a favorite shade position.
Adding/Removing Remotes: Instructions for integrating additional remotes or removing existing ones.
Motor Speed Adjustment: Clear steps for increasing (acceleration) or decreasing (deceleration) motor speed.
Shade Mode Selection: Simple process to switch between Roller Shade Mode and Sheer Shade Mode.

Maintenance Features:

Battery Charging: The motor has a built-in Li-ion battery and a Micro USB Charger Port. It is recommended to charge the motor for 6 hours before first use. A low-voltage alarm (10 beeps at start-up) indicates the need for recharging.
Remote Battery Replacement: Instructions for replacing the CR2450 battery in the remote control using an ejector tool.
Troubleshooting Guide: A comprehensive table addressing common issues such as no motor response, motor beeping, and inability to program a single motor. Solutions include recharging, checking connections, replacing batteries, addressing radio interference, and utilizing sleep mode for other motors during programming.
Safety Instructions: Emphasizes not to drop, knock, drill, or submerge the motor, proper power cable positioning, and professional installation to maintain warranty.
Coin Battery Warning: Critical safety information regarding the button cell battery in the remote, highlighting ingestion hazards, chemical burn risks, and the importance of keeping batteries out of reach of children. It also provides guidelines for safe disposal and handling of batteries.
Recycling: Encourages recycling of batteries and damaged electrical products appropriately, rather than disposing of them in general waste.

AMP AMP25B-1.1/28 Specifications

General

Brand	AMP
Model	AMP25B-1.1/28
Category	Window Blinds
Language	English