WORK AREA SAFETY
• Make sure you have adequate space to use this charger.
Position the charger as far away from the battery as permitted by
DC Cable.
• Never place the charger directly above the battery that is being
charged; as this may cause the charger to be damaged by gases
expelled from the battery.
• Never set a battery or any other object on the charger.
• Use only in a well-ventilated area.
• Never allow battery acid to drip on the charger when reading
electrolyte specific gravity or filling battery.
• Do not operate charger in a closed-in area or restrict ventilation
in any way.
• Do not charge a frozen battery.
• Use of an attachment not recommended or sold by the battery
charger manufacturer may result in a risk of fire, electric shock,
or injury to persons.
• Do not operate charger if it has received a sharp blow, been
dropped, or otherwise damaged in any way; take it to a qualified
serviceman.
• To reduce risk of electric shock, unplug charger from outlet
before attempting any repairs or cleaning. Turning off controls
will not reduce this risk.
3
To Next Page
Loading...
