7
The camera is now broadcasting a Wi-Fi network.
Leave the APOLLO App to access your device's Wi-Fi settings
and connect to the network: APOLLO-XXXX
Your Wi-Fi Network Name can be found on the back of the camera.
Once connected, re-open the APOLLO App and tap Next.
Settings
APOLLO-XXXX
Settings
APOLLO-XXXX
iOS
Android
Press and hold the gray Setup button on the back of the camera
for 3 seconds. The power LED on the front will begin to blink.
Tap Next.
If it does not blink, hold the button
down for another 3 seconds.
6
Once you see the Setup Successful page, setup is complete.
You may now mount the camera and begin recording.
10
Your Free 30 Day Cloud Recording Trial starts once the camera has
been setup. See Get Cloud Recording section (reverse side) for more
information.
If needed, enter the password for your Wi-Fi Network.
Tap Continue.
9
Select your Home Wi-Fi Network from the list.
We recommend a network that has a 50% or greater signal strength and
is green or yellow. If the signal is red or you do not see your network, you
need to move the camera closer to your router.
8
WELCOME
LONG RANGE HD WI-FI CAMERA
GET STARTED
Find an installation location, attach the stand (a), attach
the antenna (b), and plug in the Power Adapter (c).
Do not mount your camera yet.
1
b
c
a
Download the Amped Wireless APOLLO Camera
App for Android or iOS, on your phone or tablet.
2
Enter a name for your camera (i.e. Nursery). Tap Next.
5
Open the App and tap Camera Setup to launch the
Setup Wizard.
3
If you haven't already, you must now create an
account. Once you tap Create, you will receive an
email to verify your account. Follow the prompts in
the email and then return to the App and
press Continue.
4
To Next Page
Need help?
General