Ampeg BA115HP User Manual

47-683-01 • 012203
©2002 AMPEG, 1400 Ferguson Avenue, St. Louis, MO 63133 U.S.A.
BA115HP/BA210
Bassamp Cube
TECHNICAL SPECIFICATIONS:
OUTPUT POWER RATING 220 Watts at 4 ohms @5% THD
MAX INPUT LEVELS 0dB Input: 2.00V RMS
-15dB Input: 8.00V RMS
CD Input: 7.75V RMS
LINE OUT LEVEL 1.78V RMS
HEADPHONE OUT LEVEL 900mV RMS
GAIN 46dB (input to speaker out, tones @5)
STYLE 1 = -25dB @500Hz
2 = -12dB @500Hz
3 = flat
4 = +5dB @2kHz and above
5 = -6dB @50Hz and below
LOW 40dB range @50Hz
MID 30dB range @500Hz
HIGH 40dB range @10kHz
SPEAKER SPECS BA115HP: (1) 15”, 250W, 4 ohm, 2.5” voice coil dia, 56 oz. magnet
(1) 1” compression driver
BA210: (2) 10”, 150W, 8 ohm, 2” voice coil dia, 30 oz. magnet
(1) 1” compression driver
POWER REQUIREMENTS 120VAC, 60Hz, 320VA
100/115VAC, 50/60Hz, 320VA
230VAC, 50/60Hz, 320VA
SIZE AND WEIGHT 21” W x 21” H x 15-1/2” D; 86 lbs.
Ampeg continually develops
new products, as well as
improves existing ones. For this
reason, the specifications and
information in this manual are
subject to change without
notice.
CAUTION: THIS SPEAKER IS CAPABLE
OF PRODUCING HIGH SOUND PRES-
SURE LEVELS. CONTINUED EXPO-
SURE TO HIGH SOUND PRESSURE
LEVELS CAN CAUSE PERMANENT
HEARING IMPAIRMENT OR LOSS.
USER CAUTION IS ADVISED, AND EAR
PROTECTION RECOMMENDED IF
UNIT IS OPERATED AT HIGH VOLUME.

Ampeg BA115HP Specifications