Need help?Do you have a question about the Ampeg BA115HP and is the answer not in the manual?
Output and Input Levels| output power rating | 220 Watts at 4 ohms @5% THD |
|---|---|
| max input level - 0dB input | 2.00V RMS |
| max input level - -15dB input | 8.00V RMS |
| max input level - CD input | 7.75V RMS |
| line out level | 1.78V RMS |
| headphone out level | 900mV RMS |
Gain and Tone Controls| gain | 46dB (input to speaker out, tones @5) |
|---|---|
| style 1 | -25dB @500Hz |
| style 2 | -12dB @500Hz |
| style 3 | flat |
| style 4 | +5dB @2kHz and above |
| style 5 | -6dB @50Hz and below |
| low | 40dB range @50Hz |
| mid | 30dB range @500Hz |
| high | 40dB range @10kHz |
Speaker Specifications| speaker configuration | (1) 15”, 250W, 4 ohm, 2.5” voice coil dia, 56 oz. magnet |
|---|---|
| compression driver | (1) 1” compression driver |
Power Requirements| power requirements - 120VAC | 60Hz, 320VA |
|---|---|
| power requirements - 100/115VAC | 50/60Hz, 320VA |
| power requirements - 230VAC | 50/60Hz, 320VA |
Size and Weight| dimensions | 21” W x 21” H x 15-1/2” D |
|---|---|
| weight | 86 lbs |
Output and Input Levels| output power rating | 220 Watts at 4 ohms @5% THD |
|---|---|
| max input level - 0dB input | 2.00V RMS |
| max input level - -15dB input | 8.00V RMS |
| max input level - CD input | 7.75V RMS |
| line out level | 1.78V RMS |
| headphone out level | 900mV RMS |
Gain and Tone Controls| gain | 46dB (input to speaker out, tones @5) |
|---|---|
| style 1 | -25dB @500Hz |
| style 2 | -12dB @500Hz |
| style 3 | flat |
| style 4 | +5dB @2kHz and above |
| style 5 | -6dB @50Hz and below |
| low | 40dB range @50Hz |
| mid | 30dB range @500Hz |
| high | 40dB range @10kHz |
Speaker Specifications| speaker configuration | (2) 10”, 150W, 8 ohm, 2” voice coil dia, 30 oz. magnet |
|---|---|
| compression driver | (1) 1” compression driver |
Power Requirements| power requirements - 120VAC | 60Hz, 320VA |
|---|---|
| power requirements - 100/115VAC | 50/60Hz, 320VA |
| power requirements - 230VAC | 50/60Hz, 320VA |
Size and Weight| dimensions | 21” W x 21” H x 15-1/2” D |
|---|---|
| weight | 86 lbs |
Crucial safety advice for amplifier use, covering environmental conditions, electrical hazards, and proper operation.
Explains the meaning of graphical symbols indicating voltage and the necessity to refer to the instruction manual.
Guidelines for safe handling, grounding, cleaning, and maintenance of the amplifier to prevent damage and injury.
Lists compliance with EEC directives and specific safety standards for the amplifier product.
Details the 0dB Input, -15dB Input, and Gain controls for managing signal level and preamp input.
Explains the Style, Low, Mid, High, and Master controls for tone adjustment and overall output volume.
Describes the Mute switch, its function for silent tuning, and its effect on output signals.
Details the CD Input jacks, the Tuner jack for instrument tuning, and the Headphones jack.
Covers the Bal. Line Out jack, Power switch, and AC Line Cord requirements.
Explains how to use the built-in electronic tuner and interpret its LED indicators for accurate tuning.
To Next Page