Need help?Do you have a question about the Ampeg Liquifier and is the answer not in the manual?
Illustrates a typical connection for a guitar or bass amplifier.
Connects the instrument to the pedal.
Routes the signal to amplifiers or mixers.
Controls pedal power; LED indicates status.
Adjusts the speed of the LFO for the chorus effect.
Controls the intensity or amplitude of the chorus effect.
Sets the overall mix level of the effect.
This LED flashes to indicate the current rate.
Socket for optional AC/DC power supply.
Provides 9V power via an internal battery.
Read and understand the included safety instructions.
Make connections with power off and controls down.
Insert battery or connect AC/DC power supply.
Connect instrument via 1/4" shielded cable.
Adjust Rate, Depth, and Effect Level to taste.
82 dB at Effect Level @ 12:00.
+0 dB (Unity).
Internal 9V Battery, External 9V DC, ≥60mA.
2.2 x 2.6 x 4.5 inches (56 x 66 x 114 mm).
0.6 lb / 0.3 kg.
Visit Ampeg.com for warranty, manual, and registration.
Contact Technical Support at 818-575-3600.
Illustrates a typical connection for a guitar or bass amplifier.
Connects the instrument to the pedal.
Routes the signal to amplifiers or mixers.
Controls pedal power; LED indicates status.
Adjusts the speed of the LFO for the chorus effect.
Controls the intensity or amplitude of the chorus effect.
Sets the overall mix level of the effect.
This LED flashes to indicate the current rate.
Socket for optional AC/DC power supply.
Provides 9V power via an internal battery.
Read and understand the included safety instructions.
Make connections with power off and controls down.
Insert battery or connect AC/DC power supply.
Connect instrument via 1/4" shielded cable.
Adjust Rate, Depth, and Effect Level to taste.
82 dB at Effect Level @ 12:00.
+0 dB (Unity).
Internal 9V Battery, External 9V DC, ≥60mA.
2.2 x 2.6 x 4.5 inches (56 x 66 x 114 mm).
0.6 lb / 0.3 kg.
Visit Ampeg.com for warranty, manual, and registration.
Contact Technical Support at 818-575-3600.
Power| internal power requirements | 9V Battery |
|---|---|
| external power requirements | 9V DC, ≥60mA |
Audio Specifications| signal-to-noise ratio | 82 dB |
|---|---|
| maximum gain | +0 dB (Unity) |
Weight and Dimensions| weight | 0.6 lb / 0.3 kg |
|---|---|
| size | 2.2 x 2.6 x 4.5 in / 56 x 66 x 114 mm |
To Next Page