Ampeg PF-500 User Manual

PF-350 / PF-500 Bass Guitar Amplifier
8
PF-350 / PF-500 Bass Guitar Amplifier
20. FX SEND JACK:Usethis1/4"TS
unbalanced output to send a line-level
output to an external effects processor
(for example). The output here is
affected by all controls except the
volume.
Use the FX return jack to feed the
returned processed signals back into the
power amplifier.
PF-350 Rear Panel continued
14 15 16 17 18 18 19 20 21
250W rms @8
350W rms @4
speaker outputs XLR line out fx loop
return
send
power
PF 350
21. FX RETURN JACK:Usethis1/4"TS
unbalanced input to return the
processed line-level output of an external
effects processor (for example). The
processor could be fed by signals from
the FX send.

Ampeg PF-500 Specifications

General

Preamp	Solid State
Power Amp	Class D
Tone Controls	Bass, Mid, Treble
Mid Tone Control	5-position
Ultra Hi/Lo	Yes
Compressor	Yes
Effects Loop	Yes
Weight	11 lbs / 5 kg
Type	Bass Amplifier Head
Solid State or Tube	Solid State
Number of Channels	1
EQ	3-band
Footswitch I/O	No
Power Output	500W @ 4 ohms
Direct Out	Balanced XLR
Inputs	1 x 1/4"
Outputs	1 x XLR
Dimensions	14" x 11"