11
SCR-DI Bass DI with Scrambler™ Overdrive
SCR-DI TECHNICAL SPECIFICATIONS
Signal to Noise Ratio 90 dB (20 Hz–20 kHz, unweighted)
Maximum Gain @ 1 kHz Input: 24 dB; 45 dB, Scrambler in/max.
Aux input: 27 dB
Tone Controls Bass: +14/–14 dB @ 40 Hz
Mid: +5/–11 dB @ 500 Hz
Treble: +16/–15 dB @ 4 kHz
Power Requirements Internal: 9 V Battery
External: 9–12 VDC @ 100 mA
Size (H x W x D) 2.2 in x 7.6 in x 4.3 in
56 mm x 193 mm x 110 mm
Weight 2.6 lb / 1.2 kg (approximately)
Service Information
I
f you are having a problem with your SCR-DI, you can go to our website (www.ampeg.com)
and click on Support for service information, or call Technical Support at 1-800-898-3211
Monday-Friday during
normal business hours, Pacific Time
, to receive assistance. If you
are outside of the U.S., contact your local distributor for technical support and service.
The SCR-DI is
housed in a corrosion resistant die-cast zinc chassis
, so be sure to clean it with
a dry lint-free cloth.
Never spray cleaning agents on the
SCR-DI
. Avoid abrasive cleansers which
would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
www.ampeg.com
©2015 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. SW1106 Rev. A 01/15
To Next Page
Loading...
Need help?
Sound Specifications
Power
Weight and Dimensions
