Need help?Do you have a question about the Ampeg SVT-210AV and is the answer not in the manual?
Read, follow, and heed all safety warnings. User caution is advised for high sound pressure levels and ear protection is recommended.
Highlights include 1970s-era SVT appearance, compatibility with Micro-VR, Eminence speakers, and specific input/output details.
Diagram illustrating two 10-inch, 4-ohm Eminence speakers wired in parallel for an 8-ohm total impedance.
Connect amplifier speaker-level output using non-shielded cable. Output jack allows parallel connection to a second cabinet.
Details impedance (8 ohms), power rating (200W RMS), cabinet construction (Birch plywood), and speaker dimensions (2x10").
Contact information for website support, phone support (1-800-898-3211), and local distributors for technical assistance.
Read, follow, and heed all safety warnings. User caution is advised for high sound pressure levels and ear protection is recommended.
Highlights include 1970s-era SVT appearance, compatibility with Micro-VR, Eminence speakers, and specific input/output details.
Diagram illustrating two 10-inch, 4-ohm Eminence speakers wired in parallel for an 8-ohm total impedance.
Connect amplifier speaker-level output using non-shielded cable. Output jack allows parallel connection to a second cabinet.
Details impedance (8 ohms), power rating (200W RMS), cabinet construction (Birch plywood), and speaker dimensions (2x10").
Contact information for website support, phone support (1-800-898-3211), and local distributors for technical assistance.
General| Type | Bass Cabinet |
|---|---|
| Speaker Configuration | 2 x 10" |
| Power Handling | 400 Watts RMS |
| Impedance | 8 ohms |
| Frequency Response (-3dB) | 58Hz-5kHz |
| Usable Low Frequency (-10dB) | 40Hz |
| Sensitivity | 98 dB |
| LF Driver | 2x10" Custom Eminence® woofers |
To Next Page