Ampeg SVT-410HE User Manual

SVT-410HE Bass Guitar Cabinet
5
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
MODEL: SVT410HE IMPEDANCE: 8 OHMS
POWER: 500W RMS/1000 PEAK
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
MODEL: SVT410HE IMPEDANCE: 8 OHMS
POWER: 500W RMS/1000 PEAK
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
MODEL: SVT410HE IMPEDANCE: 8 OHMS
POWER: 500W RMS/1000 PEAK
-db
LEVEL CONTROL
4
5
6
7
8
8
9
10
11
12
16
0
1
2
3
MODEL: SVT410HE IMPEDANCE: 8 OHMS
POWER: 500W RMS/1000 PEAK
INSIDE
INSIDE INSIDE
1
2
2
Example 2 above is not as common, but is great for daisy-chaining multiple cabinets. You
may connect a speaker cable with 1/4" or Speakon ends from one speaker output of the
amplier to the speaker input of the Ampeg SVT-410HE cabinet. An additional cabinet may
be connected by attaching another speaker cable from an open jack (thru) to the input jack
of the next cabinet. Multiple cabinets may be daisy chained this way.
WARNING: Always use good quality (non-shielded) speaker cables. Never use
(shielded) instrument cables to connect speakers to an amplier. Also, do not use
both cable routes listed in example 2 above. Use one route or the other, but never both
simultaneously!

Ampeg SVT-410HE Specifications

General

Brand	Ampeg
Model	SVT-410HE
Category	Enclosure
Language	English