SVT-410HE Bass Guitar Cabinet
6
Technical Specications
Type 4x10 Bass Enclosure
Frequency Response (+/–3 dB) 60 Hz – 18 kHz
Usable Low Frequency (–10 dB) 43 Hz
RMS Power Handling 500 Watts RMS
Peak Power Handling 1000 Watts
Impedance 8 Ω
Sensitivity 98 dB SPL 1W/1m
Maximum SPL 122 dB
Components Four 100 Watt, 30 oz. Magnet, Low Frequency
Drivers
1 High Frequency Horn
Size (H x W x D) 25 in x 24 in x 16 in
635 mm x 610 mm x 407 mm
Weight 91 lb/41.28 kg (approximately)
The SVT-410HE is covered with a durable, fabric-backed vinyl material. Clean with a dry, lint-free cloth. Never spray
cleaning agents on the SVT-410HE. Avoid abrasive cleansers which would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications and
information in this manual are subject to change without notice.
CAUTION: THIS SPEAKER IS CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED
EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS.
USER CAUTION IS ADVISED. AND EAR PROTECTION RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
To Next Page
Loading...
Need help?
General
