Ampeg SVT-CL - Disassembly Procedure Manual

ESD Warning:
To avoid damage by electrostatic discharge please use ESD precautions.
MODEL(S) 9/6/2012
SVT-CL
SVT-Heritage
Page 1 of 11
Disassembly Procedure
Tools Required:
Safety Glasses
ESD Precautions
Needle Nose Pliers
Socket(s)
Screwdriver(s) Phillips Head #1, #2
Wire Cutters
Safety Warning:
Caution! These instructions are for use by qualied personnel only. To avoid electric shock, do not per-
form any service unless you are qualied to do so. Refer all service to qualied personnel.