7
SOLEADO – INSTALLATION MANUAL
OPERATING THE REMOTE
1. On/off Button
Press ON/OFF button to turn the heater on and off.
2. Clock Button
Remote is powered on (as shown in picture 2-1). Present time is 00:00.
Set the time as follows:
Press Clock button. The hours will flash (as show in picture 2-2).
Press up or down button to change hour setting.
Press Clock button. The minutes will flash (as shown in pictures 2-3).
Press up or down button to change minute setting.
Press Clock button. The seconds will flash (as shown in picture 2-4).
Press up or down button to change hour setting.
Press Clock button again. The seconds will stop flashing and the setting is finished.
POWER
PERCENTAG
POWER
TIME
TIME ON
HEAT
LEVEL
REMOTE APPEARANCE REMOTE LED DISPLAY
2-1 2-2 2-3 2-4
To Next Page
Loading...