4
Step 9：Set shelf brackets (GS003) according to
desired position in tall cabinet (T47805) and
2-door cabinet (T47809).
Step 10：Set shelves in tall cabinet (T47805) and
2-door cabinet (T47809).
Step 12：After assembly is finished and properly
leveled, align wall connector (GS013) to central
connector post (T47811) and fasten to wall using
M4 x 30mm screws (GS012).
Step 11：If floor is uneven, adjust adjustable legs
(GS001) to desired height.
Step 8：Affix baseboards (T47805-09, T47805-10
and GS010) using provided M5 x 12mm bolts (GS007).
To Previous Page
Loading...