Need help?Do you have a question about the Amprobe LAN-1 and is the answer not in the manual?
General| Model | LAN-1 |
|---|---|
| Category | Cable Tester |
| Display | LED Indicators |
| Power Source | 9V Battery |
| Wire Mapping | Yes |
| Connectors | RJ45 |
| Testing Capability | Continuity, Shorts, Opens, Miswires |
Details on returning the product for warranty or non-warranty repair, including required information.
Procedures for returning defective test tools during the warranty period for exchange.
Information on non-warranty repair and replacement services for different regions.
Crucial safety warnings and precautions for using the device to avoid hazards.
List of items included in the shipping carton and instructions for checking them.
Overview of the LAN-1 Cable Tester's purpose and design.
Steps for powering on the device and understanding LED indicators.
Instructions for performing a loopback test with the cable at one location.
Instructions for performing a remote test with the cable at different locations.
How to use the HOLD button to save test results and stop testing.
Visual examples of test results for continuity, open, short, and miswire conditions.
Key technical specifications of the LAN-1 Cable Tester, including display and battery.
Maximum line length, connector types, and a safety warning.
Steps for troubleshooting malfunctions and cleaning the instrument.
Instructions on how to replace the battery and when to remove it.
To Next Page