Need help?Do you have a question about the AMTAST AMT303 and is the answer not in the manual?
General| Type | Sound Level Meter |
|---|---|
| Frequency Range | 31.5 Hz to 8 kHz |
| Accuracy | ±1.5 dB |
| Frequency Weighting | A and C |
| Microphone | 1/2 inch electret condenser microphone |
| Display | LCD |
| Resolution | 0.1 dB |
| Power supply | 9V battery |
| Measurement Range | 30 to 130 dB |
| Measuring Level Range | 30 dB to 130 dB |
| Probe Type | Microphone |
Identifies key physical parts of the water timer, including connections, screen, and controls.
Explains operational modes like setting clock, start time, and duration for automatic watering.
Details operating pressure, temperature, power, waterproofing, and rain delay capabilities.
Step-by-step instructions for installing batteries and related notes.
Guides users on how to attach the timer to an outdoor hose faucet.
Guides users through setting the current time on the water timer display.
Details how to set the desired start time for automatic watering.
Instructions to select the duration for each watering cycle.
Guides users on setting the frequency or interval between watering cycles.
Explains activating Auto mode for scheduled watering and Turn Off mode to stop operation.
Instructions for performing manual watering and ending the task.
Instructions to set a temporary pause for watering due to rain.
Explains how to enable and disable the child lock to prevent accidental changes.
Troubleshooting steps for when the LCD screen is blank after installing batteries.
Troubleshooting steps for when the timer does not water at the preset time.
Troubleshooting steps for leaks at the hose tap connection or outlet.
To Next Page