AMTAST AW006 - Introduction and Initial Setup; Warnings and Cautions; Quick Start Guide

3
1. Introduction
Thank you for your purchase of the Solar Powered Wireless WiFi Weather
Station. The following user guide provides step by step instructions for
installation, operation and troubleshooting.
2. Warnings and Cautions
Warning: Any metal object may attract a lightning strike, including
your weather station mounting pole. Never install the weather station in a
storm.
Warning: Installing your weather station in a high location may result
in injury or death. Perform as much of the initial check out and operation on
the ground and inside a building or home. Only install the weather station
on a clear, dry day.
3. Quick Start Guide
Although the manual is comprehensive, much of the information contained
may be intuitive. In addition, the manual does not flow properly because the
sections are organized by components.
The following Quick Start Guide provides only the necessary steps to install,
operate the weather station, and upload to the internet, along with
Required
Step
Description
Section
1
Assemble and power up the sensor array
5.3.1-5.3.3
2
Power up the display console and synchronize with
sensor array
5.5
5
Mount the sensor array
5.3.4
3
Set date and time on console
6.4.3
4
Calibrate the relative pressure to sea-level conditions
(local airport) on console
6.4.4
6
Reset the rain to zero on console
6.4.8
Optional
7
Configure WiFi
8.1
8
Register and upload to Weather Server
9