7. Wires connection
Please pay attention to the positive and negative poles of the wire. If
the positive and negative poles are reversed, it may surge and cause
the monitor to smoke. If the monitor is emitting smoke, please turn
off the power immediately and contact customer support.
(1) The monitor can be powered by a cigarette lighter.
(2) The camera can be powered by one of two methods.
a) If you plan to use the camera only when backing up, power it
by attaching it to the backup/reverse tail-light of your car.
b) If you plan to use the camera continuously (while driving and
reversing), power it by connecting it to the running
light/tail-light (the lights that is on continuously while driving).
If you have questions about this step or the power supplies in
your specific car make/model, email us.
To Next Page
Loading...