netlinx
®
mini-cardframe
NETLINX MINI-CARDFRAME
The NetLinx Mini-CardFrame extends the control capabilities of the AMX
NetLinx Control System to a remote area or location. Compatible with
the NI-700, NI-2000, NI-3000 and NI-4000 controllers, the Mini-CardFrame
allows the installer to add as many as four NetLinx device-specific control
cards for expanding control and automation features.
AVAILABLE PORTS & CARDS
The Mini-CardFrame works as an extension of the NI Series, housing as
many as four control cards and providing an additional number of ports
to accommodate an increasing amount of integrated devices within a
control system. The Mini-CardFrame can provide volume, IR/Serial and
RS-232 ports to control and communicate with electronic equipment with-
in a small meeting room.
POWER OF ICSNET
The Mini-CardFrame can extend control capabilities from a NetLinx sys-
tem to a remote area or location by using the ICSNet data/power bus to
communicate with a NetLinx unit positioned up to 1,000 feet away. In sit-
uations that call for additional control functions in separate areas of con-
trol, the Mini-CardFrame can be networked together using ICSNet Hubs
that connect directly to the NetLinx Master Controller.
To Next Page
Need help?
General