Introduction
1
adia Lighting Control System
Introduction
The AMX Radia Lighting Control System
TM
employs a dual-platform programming architecture
that supports both the Axcess programming language and PROlink. The AMX Lighting product
line is modular by design, and includes a wide variety of integrated dimmer control modules,
dimmer modules, and also switch/relay modules. There are also circuit cards that can control
dimming and switching of incandescent, fluorescent, neon (cold-cathode), high and low-voltage
equipment, loads (motors), electronic and magnetic ballasts.
These cards and controllers can be housed in any of our five enclosures to ensure complete
compliance with any spacing/application requirements. Once the lighting control requirements are
defined, you can choose from the extensive group of lighting controllers, modules, etc., install them
into the best-suited enclosures, and create the perfect lighting control system for your customers.
FIG. 1 shows some of the AMX Lighting Control System components.
Features
The AMX Lighting Control System features include:
Controls up to 1,500 dimmers or 255 6-channel devices (approximate) with a AMX
Axcess Control System complete with dimmer-level feedback
Controls up to 60 dimmers with standalone PROlink systems
Supports 128 lighting scene presets stored in 16K of non-volatile memory
Recalls up to 8 of 128 presets with contact closures
Modular and scalable lighting system configurations of one to 1,500 dimmers
Supports both Axcess and PROlink programming languages
Modules are UL and C-UL listed for United States and Canadian compliance
FIG. 1 AMX Lighting Control System components
To Next Page
Loading...