AMYET
e Drive Safety
S8 E-bike
7. Check whether the front and rear screw lock and chain conditions are in good
condition.
8. Check the shaft fastening condition,ensure the front and rear axles and
handlebar clamp reliable.
Drive properly:
1. Please stand before you start the bike to the left of the main bracket stand,
view the vehicle without exception.
2. Open ON/OFF button. the power display lights,said the power supply has
been switched ON.
3. When you sit in the bike,slowly turn the speed to the inside(counter clockwise)
(right). Vehicle to start control the rotation Angle from small to large,the
speed from slow to fast.Danger Rear wheel after landing,the person did not
ride in the bike before. not the rotational speed adjustment.
4. When using brake,should first will speed the return quickly,to hold the brake
the grid.Slowly when the brakes brake,then tighten the practice of the the
ideal.Not on the brakes,steering.Emergency brake,fierce steering is the main
cause of side slip or overturned,is extremely dangerous.
Note: Only brake front or rear,the bike may appear traverse,is extremely
dangerous.
On the way to note:
1. For you and other safety,please consciously abide by traffic rules,should be
in the slow lane,are not allowed to be with people.
2. Must wear safety helmet before riding, as well as other relevant safety
precautions keep the natural position he can drive.
3. The vehicle has just started,should slow acceleration,so as not to cause
instantaneous acceleration starting current is too large waste of electricity ,
auxiliary pedal to start the better.
4. To battery,motor maintenance,start-up and climbing in the bike,the foot
function models.please try to use pedal power.
5.1n order to ensure the safe premise,driving should try to adopt economic
speed.And try to use pedal power.
9
To Next Page
Loading...