AMYET
ASSEMBLY
4. Handlebars
Locate the right-side/ left side pedal,
which is marked "R," "L, "should have
an sticker attached.
Thread the left pedal onto the left crank
gently by hand, turning counter-clockwise.
Then tighten pedal by allen wrench.
S8 E-bike
Thread the right pedal onto the right crank
gently by hand, turning clockwise. Then
tighten pedal by allen wrench.
Checkthe chain alignment. Rotatetheright
pedal and crank toward the back of the bike
as though pedaling hackward Watch the
chainandensurethe chainruns through
the drivetrain (the rear cog,chain tensioner,
and around the front chainring) smoothly.
Note: If the pedal/ chain doesn't run smoothly or something seems
misaligned, please contact AMYET Support.
15
To Next Page
Loading...