AMYET
e Pre-Riding Safety Checklist
S8 E-bike
1 1 .Electrical Cables
12. Accessories
Look over connectors to make sure they are fully
seated,free from debris or moisture
Check cables and cable housing for obvious signs of
damage
Ensure headlight,taillight,and brake light are
functioning adjusted properly,and unobstructed
Ensure all reflectors are properly fitted and not obscured
Ensure all other fittings on bike are properly secured
and functioning
Inspect helmet and other safety gear for signs of damage
Ensure rider is wearing helmet and other required
riding safety gear
• Ensure mounting hardware is properly secured if
fitted with rear rack
Ensure taillight and taillight power wire are properly
secured if fitted with rear rack
Ensure fender mounting hardware is properly secured
if fitted with fenders
Ensure there are no cracks or holes in fenders if fitted
with fenders
Your cables,spokes,and chain will stretch after an initial break-in period of 50-100 mile
(80-160km),and bolted connections can loosen. Always have al certified,reputable be
mechanic perform on your E-bike after your initial break-in period of 50-100 mile
(80-160km) (depending on riding conditions such as total weight,riding characteristics,
and terrain). Regular inspections and tune-ups are particularly important for ensuring
that your bike remains safe and fun to ride.
7
To Next Page
Loading...