AMYET
e Pre-Riding Safety Checklist
S8 E-bike
5.Bearings
6.Cranks and Pedals
7. Derailleurs
8. Frame,Fork,and Seat
9. Motor Drive Assembly
and Throttle
10. Battery
6
Ensure all bearings are lubricated,run freely,and
display no excess movement grinding,or rattling
Check headset,wheelbearings,pedal bearings,and
bottom bracket bearings
Ensure pedals are securely tightened to the cranks
Ensure the cranks are securely tightened and are
not bent
Check that the derailleur is adjusted and functioning
properly
Ensure shifter and brake levers are attached to the
handlebar securely
Ensure all brake and shift cables are properly lubricated
Check that the frame and fork are not bent or broken
If either frame or fork are bent or broken,they should
be replaced
Check that the seat is adjusted,properly and seat
post quick release lever is securely tightened
Ensure hub motor is spinning smoothly and motor
bearings are in good working order
Ensure all power cables running to hub motor are
secured and undamaged
Make sure the hub motor axle bolts are secured and
all torque arms and torque washers are in place
Ensure battery is charged before use
Ensure there is no damage to battery
Lock battery to frame and check to see that it is secured
Charge and store bike and battery in a dry location,
between
Let bike dry completely for using again
To Next Page
Loading...