To Next PageTo Next PageWhat to do if nothing works on my Amylior Wheelchair?
If your Amylior Wheelchair isn't working, begin by checking the batteries and all cable connections. Ensure the 24V power cable is connected properly. Also, check the fuse and replace it if necessary. Finally, reset the breaker if it has popped.
What to do if the fuse burns or breaker pops repeatedly on my Amylior Wheelchair?
If the fuse burns or the breaker pops repeatedly on your Amylior Wheelchair, carefully check the mechanical assembly for any restraints. If you can't resolve the issue, further assistance is needed.
Why is the actuator noisy when going up or down on my Amylior Wheelchair?
If the actuator on your Amylior Wheelchair is noisy when moving up or down, it could be due to a defective actuator or a mechanical restraint. Ensure the seat is properly aligned and doesn’t interfere with the power tilt actuator when tilting. Check for and remove any mechanical restraints.
What to do if the drive lock-out switch, tip switch or reduce drive switch do not work properly on Amylior Wheelchair?
If the drive lock-out switch, tip switch, or reduce drive switch on your Amylior Wheelchair aren't working correctly, verify the mechanical operation of the limit switches. Check the electrical assembly and programming. Also, check if any cables are pinched. Further assistance is needed.
What to do if relays can be heard, but actuator does not operate on my Amylior Wheelchair?
If you hear the relays but the actuator doesn't operate on your Amylior Wheelchair, first verify the electrical connection assembly and programming. Check for pinched cables. If the problem continues, further assistance is needed.
How to fix an actuator that only goes in one direction on my Amylior Wheelchair?
If the actuator on your Amylior Wheelchair only moves in one direction, the cause may be wrong programming or incorrect cable connections, or pinched cables. Verify the electrical assembly and programming thoroughly. If problem persists, further assistance is needed.
What to do if the charger fuse burns every time I try to charge the batteries of my Amylior Wheelchair?
If the charger fuse burns each time you attempt to charge the batteries on your Amylior Wheelchair, ensure you are using the battery charger provided with your wheelchair and verify all cables.
Provides contact information and feedback channels for users.
Guides users on where to seek help and who to contact for support.
Highlights critical safety information for users operating the wheelchair.
Provides essential safety warnings for service personnel.
Specifies the maximum weight capacity for the wheelchair base.
Indicates the adjustable range for the wheelchair's seat width.
Describes the adjustment and type of armrests available for the wheelchair.
Explains the adjustability and features of the knee support system.
Details the sizes and adjustment options for the chest support.
Guides users on selecting appropriate wheelchair features and safety options.
Emphasizes the importance of regularly reading and understanding the manual.
Explains how EMI can affect wheelchair operation and cause damage.
Identifies common sources of electromagnetic interference that may affect the wheelchair.
Discusses the wheelchair's resistance to EMI and factors affecting it.
Provides instructions on reporting unintended wheelchair movements due to EMI.
Crucial safety precautions for both users and those assisting them.
Details the maximum weight capacity and its implications.
Outlines essential checks to perform before each use of the wheelchair.
Warns against unauthorized modifications that can void warranty and create hazards.
Essential safety procedures for a parked wheelchair to prevent accidents.
Advises on operating the wheelchair in various environmental conditions and avoiding water damage.
Guidance on suitable terrains and warnings for operating on uneven surfaces.
Safety considerations for operating the wheelchair on public roads and in traffic.
Instructions for safely transporting the wheelchair in vehicles.
Explains factors affecting CG and its impact on wheelchair stability.
Provides detailed steps for safe transfers into and out of the wheelchair.
Warns about risks associated with leaning or reaching while in the wheelchair.
Guidance on navigating obstacles and avoiding potential tip-overs.
Safety precautions for operating on ramps, slopes, and inclines.
Instructions and warnings for traversing curbs and single steps.
Specifies that armrests are not designed to bear weight.
General warnings about handling and using wheelchair batteries safely.
Details on footplate height, tripping hazards, and proper usage.
Procedures for engaging/disengaging levers and safety precautions.
Advice on maintaining tire pressure and condition for optimal performance.
Instructions for the safe and proper use of positioning belts.
Warnings about using non-approved seating systems and height limits.
General warnings and precautions for operating power seating and standing functions.
Operation and safety note for the power tilt function.
Operation and safety note for the power recline function.
Operation and safety note for the power standing function.
Lists the basic toolkit required for setup and maintenance.
Information on battery safety, fuses, and resetting the breaker.
Step-by-step guide for safely removing and reinstalling batteries.
Instructions for adjusting the footplate and calf pad positions.
Details on how to adjust the height and position of armrests.
Information on adjusting the headrest for optimal positioning.
Explains the standing function and mandatory safety requirements.
Instructions for fastening and adjusting the pelvic belt for safety.
Guidance on using, adjusting, and fastening the chest strap.
Instructions for installing, removing, and using the knee support.
Details on adjusting the joystick's depth, height, rotation, and angle.
Procedures for engaging/disengaging levers for manual operation.
Overview of the R-Net joystick and its connection to the power module.
Steps to lock or unlock the joystick for security and safety.
How to navigate and adjust display settings like time and backlight.
Importance of matching control settings to user ability and environment.
Explains the function of the thermal roll-back circuit for motor protection.
Overview of how to operate various power seating and standing functions.
Operation and safety note for the seat tilt function.
Operation and safety note for the seat elevate function.
Operation and safety note for the backrest recline function.
Explains the creep mode feature for reduced speed operation.
Detailed instructions and warnings for using the power standing function.
How to operate power options using different joystick types.
Methods for activating single and multiple power seating/standing functions.
Guide on saving and recalling custom seating positions.
Specifies the type and size of batteries required for the wheelchair.
Instructions for the initial charging period to ensure battery longevity.
Warnings about deep discharge and proper storage of batteries.
Information on using the battery charger safely and correctly.
Safety precautions and steps for charging the wheelchair batteries.
Guidance on the proper and safe disposal of used batteries.
Methods for cleaning different parts of the wheelchair to prevent wear.
Procedures for cleaning and disinfecting the wheelchair for re-use.
Recommendations for storing the wheelchair properly when not in use.
Schedule and procedures for maintaining wheelchair batteries.
Advice on maintaining tire pressure and condition for optimal performance.
A schedule outlining maintenance tasks and their frequencies.
Diagram and instructions for correctly connecting wheelchair batteries.
General| Brand | Amylior |
|---|---|
| Model | ALLTRACK M3 |
| Category | Wheelchair |
| Language | English |
