Call Tone
A call tone alerts others you want to talk.
To send a call tone to other radios in your group, press .
Your radio has 5 different call tones. To select between the 5 call
tones:
1. Press three times until a “C” displays on the upright;
2. Press or to change the call tone; “0” is no call
tone;
3. Press PTT to confirm
Monitor
Use monitor function to detect the activity of the channel you set.
To enter monitor function, press six times.
You will hear a lot of noise if there is nobody using the current
channel.
To exit the function, press again or press PTT.
目錄
功能說明………………………………………………………7-8
警告…………………………………………………………..9
裝上掛頸繩………………………………………………………...9
安裝電池…………………………………………………………..9
開 / 關對講機……………………………………………………..9
調較音量………………………………………………………….10
通話和收聽……………………………………………………….10
通話範圍…………………………………………………………10
檢查功能…………………………………………………………10
檢查頻道………………………………………………………….11
設定頻道…………………………………………………….........11
掃瞄頻道………………………………………………………11
進一步掃瞄……………………………………………………..12
從頻道檢測清單中刪除頻道…………………………………….13
特別功能………………………………………………………….13
消除干擾密碼…………………………………………………….13
按鍵講話計時器………………………………………………….14
將鍵盤上鎖……………………………………………………….14
傳呼訊號的設定和傳送………………………………………….14
應答鳴聲…………………………………………………………15
話音啟動 / 聲控 (VOX) 配件 (額外選購)………………15
使用聲控(VOX)功能…………………………………………….15
設定敏感度……………………………………………………….16
電量計…………………………………………………………….16
使用耳機配件 (額外選購)…………………………………….17
6
To Next Page
Loading...