Channel
Freq
(MHz)
Channel
Freq
(MHz)
1 409.7500 11 409.8750
2 409.7625 12 409.8875
3 409.7750 13 409.9000
4 409.7875 14 409.9125
5 409.8000 15 409.9250
6 409.8125 16 409.9375
7 409.8250 17 409.9500
8 409.8375 18 409.9625
9 409.8500 19 409.9750
10 409.8625 20 409.9875
Select CTCSS Code
The two radios must be of same channel and CTCSS code (you can
disable the CTCSS code by setting it to 0) in order to communicate.
1. Press key twice. The CTCSS code number will begin
to flash.
2. Use or key to change the CTCSS code.
3. Press PTT key to set the new CTCSS code.
Scan
Use scanning to monitor channels for transmissions, or to find
someone in your group who has accidentally changed channels.
1.Press four times until scan icon flashing and “Y” or
“-” display.
2.Press either
Until “Y” displays to turn scanning on.
Until “-” displays to turn scanning off.
3.Press PTT to confirm.
When the radio detects channel activity, it stops scanning and you
can hear the transmission. Press PTT within 5 seconds to respond.
Scan Advance
If scan stops on a channel that you don’t want to listen to, briefly
press
or key to resume scanning for the next active
channel.
Key Lock
Use key lock function to avoid accidentally changing the radio
setting.
1. Press five times until key lock icon flashing and “Y”
or “-” display.
2. Press either
Until “Y” displays to turn key lock on.
Until “-” displays to turn key lock off.
3. Press
PTT
to confirm.
4. In key lock mode, , and keys are all disabled.
However, you can still use PTT and to transmit voice or
call tone.
5. To exit Key Lock, press and hold until an exit tone rings
and the icon dispears.
4 5
To Next Page
Loading...