EasyManua.ls Logo

amzchef S-1001G-A01-M7-600 - User Manual

amzchef S-1001G-A01-M7-600
82 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUALE DI ISTRUZIONI
RANGE HOOD
DUNSTABZUGSHAUBE
HOTTE ASPIRANTE
CAMPANA EXTRACTORA
CAPPA ASPIRANTE
S-1001G-A01-M7-600
AC 220-240V 50Hz
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY
RETAIN THIS MANUAL FOR FUTURE REFERENCE

Questions and Answers

  • B
    Brad CookAug 9, 2025
    What to do if my amzchef Ventilation Hood is shaking?
    • F
      Francis BryanAug 9, 2025
      If your amzchef Ventilation Hood is shaking, there are a few potential causes. It could be that the leaf is damaged, causing the shaking, in which case you should replace the leaf. Another possibility is that the motor isn't tightly secured; make sure to lock the motor tightly. Finally, the body itself might not be tightly secured, so ensure that the body is fixed tightly.
  • K
    kellystephensAug 14, 2025
    Why is my amzchef Ventilation Hood light on but the motor doesn't work?
    • R
      Richard MooreAug 14, 2025
      If the light is on but the motor of your amzchef Ventilation Hood isn't working, it could be due to several reasons. The leaf might be blocked, so you should get rid of the blocking. Alternatively, the capacitor might be damaged, requiring a replacement. It's also possible that the motor bearing is jammed or damaged, or that the motor is internally off or emitting a bad smell, in which case you should replace the motor.
  • J
    Jennifer GreenAug 19, 2025
    What to do if oil drops from the metal grease filer of my amzchef Ventilation Hood?
    • D
      Drew SerranoAug 19, 2025
      If you notice oil dripping from the metal grease filter of your amzchef Ventilation Hood, it's likely that the filter is heavily fouled. You should immediately clean or replace the metal grease filter.
  • V
    vanessamurilloAug 25, 2025
    Why amzchef Ventilation Hood has insufficient suction?
    • J
      Jessica MurphyAug 25, 2025
      Insufficient suction in your amzchef Ventilation Hood can occur if the body is not tightly hanged, in this case you should readjust the distance. Also, too much ventilation from open doors or windows can be the cause. To solve this, choose a new place and resemble the machine.
  • S
    sheltonjeanneAug 29, 2025
    What to do if my amzchef Ventilation Hood machine inclines?
    • S
      sandrapetersonAug 29, 2025
      If your amzchef Ventilation Hood machine is inclining, it's likely due to the fixing or hanging screws not being tight enough. You should tighten the hanging screw and make it horizontal.
  • S
    Sarah HintonSep 3, 2025
    How to fix amzchef Ventilation Hood when light and motor do not work?
    • D
      Diana MedinaSep 3, 2025
      If neither the light nor the motor of your amzchef Ventilation Hood are working, it could be due to a damaged light, in which case you should replace the lights. Another cause might be a loose power cord, so connect the wires as per the electric diagram.

amzchef S-1001G-A01-M7-600 Specifications

General IconGeneral
Brandamzchef
ModelS-1001G-A01-M7-600
CategoryVentilation Hood
LanguageEnglish

Related product manuals