EasyManua.ls Logo

AN-Motors ASG600/3KIT User Manual

AN-Motors ASG600/3KIT
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
РУКОВОДСТВО
ПО МОНТАЖУ И ЭКСПЛУАТАЦИИ
Комплекты серии ASG/KIT
для автоматизации гаражных ворот
ASG600/3KIT
ASG1000/3KIT
ASG1000/4KIT
Installation and operation manual
Sets series ASG/KIT for automation of garage doors
Question and Answer IconNeed help?

Do you have a question about the AN-Motors ASG600/3KIT and is the answer not in the manual?

AN-Motors ASG600/3KIT Specifications

General IconGeneral
Max Door Weight600 kg
Power200 W
Voltage230 V
Frequency50 Hz
Maximum Door Weight600 kg
ControlRemote Control
Safety FeaturesObstacle detection

Summary

General Information and Safety Measures

Product Description

Scope of Supply

Lists all items included in the automation set for garage doors.

Technical Characteristics

Details specifications for the drive and radio control unit.

Installation Preparation

Preliminary Inspection

Checks suitability and conditions before installation.

Tools and Materials for Installation

Lists minimum required tools and materials for installation.

Preliminary Works

Defines preparatory steps before installation begins.

Installation

Assembling of the Drive Rail

Instructions for assembling the drive rail components.

Installation of the Drive on the Rail

Steps to mount the drive unit onto the assembled rail.

Rail Fixing to the Wall Above the Doors

Guidance on securing the rail to the wall above the garage door.

Rail Fixing to the Ceiling

Instructions for attaching the rail to the ceiling.

Connection of Carriage and Door Curtain

Details on connecting the carriage to the door curtain.

Electric Supply System

Photo Cells Installation

Explains how to install and connect photo cells for safety.

Control Buttons Installation

Describes connecting control buttons for manual operation.

Other Devices Installation

How to connect other accessories like universal receivers.

Accumulator Installation

Instructions for installing an accumulator for backup power.

Drive Connection to the Electric Network

Steps for connecting the drive to the main power supply.

Adjustment

Adjustment of Final Positions

How to set the fully open and closed limits for the door.

Adjustment of Working Modes

Configuring drive parameters like power, photo elements, and auto-closing.

Programming of Control Board

How to program radio control consoles to the drive.

Testing and Commissioning

Testing

Procedures to verify the drive system's correct operation after installation.

Commissioning

Final steps and checks before handing over the system.

Operating

Defects and Recommendations on Their Elimination

Storage, Transporting and Utilization

Related product manuals